Product Description
Automaitc Industry RO membrane FRP machine
Introduction:
This FRP machine is automatic FRP for 4040 and 8040 element, this machine is a automatic machine, fiber glass through the mixed 2 components epoxy glue tank, the fiber glass with mixed epoxy outside rotating the industry element, and need manual support to remove the extra mixed epoxy, and extra mixed epoxy will drop into the glue tank for recycling use.
Main configuration of machine:
| No. |
Part Name |
QTY |
Notes |
| 1 |
Automatic glue mixing and dipping system |
1 |
KS05-50 |
| 2 |
Computer Controlled Horizontal Winding System |
1 |
FW200×1000 |
Parameter function requirement of Automatic Dispenser:
| Mixing ratio and requirements |
Stable proportion, accurate measurement and sufficient mixing |
| Range of Radio |
100:100 (weight ratio) can be customized according to requirements |
| Range of delivery capacity |
38ml-196ml/shot (1500ml/min) |
| Delivery Density |
±2% |
| Mixing method |
Static mixing |
Basic principle and composition of dispenser machine:
Main configuration of Dispenser machine:
Main agent barrel:
| Type |
SUS304 Simple pressure barrel |
| volume |
60L/ 1pc |
| Feeding method |
Vacuum suction |
| Special configuration |
Barrel with minimum limited sensing |
| Manual stop valve between barrel and pump section |
Hardening agent barrel:
| Type |
SUS304 Simple pressure barrel |
| volume |
60L/ 1pc |
| Feeding method |
Vacuum suction |
| Special configuration |
Barrel with minimum limited sensing |
| Manual stop valve between barrel and pump section |
Main metering pump:
| Type |
Volume measurement method |
Metering pump diameter |
Φ40 |
| Materials for metering pump chambers |
SUS304Nitriding treatments |
Piston material |
SUS304Nitriding treatments |
| Pump section check valve |
3T SUS+PTFE+EPDM |
| Remark |
Check valves and metering pumps are customized |
Hardener metering pumps section:
| Type |
Volume measurement method |
Metering pump diameter |
Φ50 |
| Materials for metering pump chambers |
SUS304Nitriding treatments |
Piston material |
SUS304Nitriding treatments |
| Pump section check valve |
3T SUS+PTFE+EPDM |
Drive Source:
| Drive method |
Cylinder drive |
| Remark |
Power AC220V Air source (0.5Mpa~0.7Mpa) |
Mixing Section:
| Static mixing |
Method |
Double liquid valve Static mixing |
| Specification |
MS13-32 Switzerland MIXPAC |
Pipeline - Piping part:
| Pump OUT pipe |
Main |
Category |
34PW (Imported from Japan, seamless anti-breathable crystals) |
| agent |
Size·Length |
3/8 lengths to be made |
| Hardening agent |
Category |
34PW (Imported from Japan, seamless anti-breathable crystals) |
| Size·Length |
3/8 lengths to be made |
Basic motion coordinate parameters for winding machines:
(1) Mandrel rotation - first coordinate.
(2) Maximum main axis speed: 200rpm.
(3) Maximum diameter of winding core mould: Φ200mm.
(4) Maximum weight of core mould (including products): 20kg.
(5) Clamping method: three-jaw chuck on the main axis side, equipped with a special fork, and pneumatic + rotation fixed cone for the cocktail.
(6) Main axis drive: Japanese AC servo motor + domestic precision gear reducer
(7)Main axis center height: 1050mm
(8) Horizontal movement of trolley - second coordinate.
(9) Winding length: ≤1000mm; horizontal routing of trolley: ≤1200mm.
(10) Maximum running speed of the trolley: 0.5m/s.
(11) Trolley drive: gears, rack and pinion.
(12) Trolley positioning guide: Taiwan ABBA precision linear guide rail pair.
(13) Trolley drive: Japan Panasonic AC servo motor + domestic precision gear reducer.
(14) Trolley support unit height drop.
Control System:
1) Hardware composition: Taiwan Yanhua industrial control machine + American motion control card + colour display + keyboard + overall sealed circulating air-cooled control cabinet.
2) Software function: The winding software developed by the company based on rich process experience, with good human-machine interface and convenient operation, can realize automatic winding by simply inputting simple process parameters, and can start and stop the program at any time during the winding process to meet the demand of the production process.
Others machine parameter:
Winding angle: 54° to 90°; repeat positioning accuracy of the trolley: ±0.25mm; tail body movement: 600mm; winding tension: ≤30kg. Max. yarn capacity: 6 balls; max. product eccentricity: 5kg.
Diagram of the dipping tank:
Packaging & Shipping
Company Profile
Shanghai WECOME Environmental & Technology Co., Ltd is a professional membrane technology and materials supplier with production and sales together. We are focus on water membrane automatic production machines and attached membrane materials supply, we have our own tape production line and mold manufacture center, so we can supply you specialized color, SPEC and LOGO mark tape products or membrane central tube products.
Exhibition
Certifications
FAQ
1 Who we are?
We are specializing in RO membrane solutions, including rolling machines and raw materials, like central tube, spacer, tricot(permeate carrier), sheet, glue etc. We also have our own factory, which is based in 2011.
2 Do your products support customization? Can I put my logo on the product?
Yes, sure. We support customized logo in the product including packing.
3 How long does the delivery 40HQ container usually take?
One 40HQ container we can delivery about 15-20 days after receiving full payment.
4 Can I get a free sample? And how long does the delivery sample usually like?
Yes, sure. We can provide you free sample, you just responsible for shipping cost. We can prepare 3-5 days for sample production.
5 Where are your company? Can I visit your company?
Yes, sure. We are located in Shanghai, China. We also have branch located in Beijing, Shenzhen and India.
6 Why choose Wecome?
Not only we are a material supplier, we are also your reliable technical adviser. We have long time experience in membrane rolling market and have many years experiences of imports and exports.
Audited Supplier 
){kind=link}
){kind=link}